Newsletter

Our Branch
SportVL Jonquière

Jonquière 3569, boulevard Harvey Jonquière, Québec
G7X 3B6, Canada (418) 695-6950

Opening hours

Monday to Wednesday : 8:30AM to 12:00PM and 1:00PM to 5:30PM

Thursday and Friday : 8:30AM to 12:00PM and 1:00PM to 5:30PM and 6:30PM to 9:00PM

Saturday : 9:00AM to 12PM

SportVL Jonquière

Chicoutimi 1821 boulevard St-Paul Chicoutimi, Québec
G7J 4M9, Canada (418) 698-6980

Opening hours

Monday to Wednesday : 8:30AM to 12:00PM and 1:00PM to 5:30PM

Thursday and Friday : 8:30AM to 12:00PM and 1:00PM to 5:30PM and 6:30PM to 9:00PM

Saturday : 9:00AM to 12PM

SportVL Jonquière

La Baie 2493, rue Bagot La Baie, Québec
G7B 2N4, Canada (418) 544-0623

Opening hours

Monday to Wednesday and Friday : 8:30AM to 12:00PM and 1:00PM to 5:30PM

Thursday : 8:30AM to 12:00PM and 1:00PM to 5:30PM and 6:30PM to 9:00PM

Saturday : closed

MOUNTAIN FIT HOODS (PROTECTEUR DE TRAPPE D'AIR)  There are 15 products.

Showing 1 - 15 of 15 items
  • This abs framed vent has our pvc coated mesh to the outside with a prefilter mesh behind the coarse mesh to keep snow/moisture off your clutches. This vent works great for eliminating the vent cat added in 15, that stock vent has no prefilter and allows fine snow to get to your clutches. This single vent comes with black rivets and rivet backers for... This abs framed vent has our pvc coated mesh to the outside with a...

    CAD$35.99
  • The stock side panel vents have a problem with letting in light powder when in deep snow. This set of vents install in place of the stockers using the stock hardware The stock side panel vents have a problem with letting in light...

    CAD$42.99
  • This Single vent has a second prefilter material layer to keep fine snow and moisture out. Supplies your stock upper airbox with additional cold air. Comes with black rivets and rivet backers for install. This Single vent has a second prefilter material layer to keep fine...

    CAD$49.99
  • Set of two shock tower vents for the ascender chassis cat. Clutch side vent supplies a blast of cold air directly to the primary clutch. Clutch side vent has premium Outwears mesh added behind our coarse outer mesh, clutch side vent should have silicone added to the back of the vent frame when installed. Set of two shock tower vents for the ascender chassis cat. Clutch...

    CAD$56.99
  • Set of hdpe inserts that lets the sled breath without letting snow in to your clutches. These have NO MESH AND ARE NOT ABS! We were the first company to develop the abs/phipher mesh vent that have become the indusrty standard for vents, however the foot well of a sled is the one place ABS AND MESH DOES NOT BELONG, that is why our footwell block offs are... Set of hdpe inserts that lets the sled breath without letting snow...

    CAD$56.99
  • Set of two vents that install on your dash and supply your air intake with additional air. This kit is supplied with pushpin fasteners and needs to have silicone applied to the vents when installing. Set of two vents that install on your dash and supply your air...

    CAD$56.99
  • Set of two vents to protect the vulnerable stock intake vents found on the XM chassis. Vents are cnc cut from durable abs, coarse pvc coated mesh gives you the protection needed to keep branches and other objects from puncturing the stock mesh intake, the durable pvc covered mesh is solvent welded to the abs frame to form a permanent bond. Set of two vents to protect the vulnerable stock intake vents found...

    CAD$59.99
  • Set of two vents that install on the front edge of each side panel. Great blast of cooling air from this front mounted vents, great addition to our lg side panel vents. Both vents have a fine prefilter material added behind or coarse outer mesh. Set of two vents that install on the front edge of each side panel....

    CAD$64.99
  • These vents provide a direct shot of cooling into the engine compartment on your rush / pro ride chassis. Kit includes two vents, black rivets and rivet backers for install. These vents provide a direct shot of cooling into the engine...

    CAD$64.99
  • Set of knee vents for your pro ride / rush chassis sled. Give the heat under your hood somewhere to excape, the amount of heat that is released is unreal. Sold as a set one vent for each side along with more than enough black rivets and rivet backers for install. ***** this is one kit that you want to just drill holes behinmd the vents , Do Not remove the... Set of knee vents for your pro ride / rush chassis sled. Give the...

    CAD$69.99
  • Knee Vents for your proclimb / procross sled. These knee vents give the heat soaked air under your hood a place to excape, the amount of heat that is released with these vents is unreal. New updated design does not interfere with the gas tank. Kit comes complete with both vents, clutch side vent has a prefilter layer to keep snow and moisture away from... Knee Vents for your proclimb / procross sled. These knee vents give...

    CAD$84.99
  • The air intake vents found on the Gen4 chassis are easily punctured allowing snow or small branches into your air intake. Our intake covers help protect your oem intake vents from damage . Cnc cut black polycarbonate frames have a outer layer of outwears protective mesh backed by a super strong pvc coated mesh The air intake vents found on the Gen4 chassis are easily punctured...

    CAD$104.99
  • Help for you belt eating Gen4. The amount of heat buildup in the clutches on the new gen4 is a killer on belts. This kit along with a belt guard mod will help remove that heat. Front clutch vent has protective layer of outerwares prefilter mesh behind our coarse mesh to keep moisture off your clutch, the remaining 3 vents in this kit also keep fine snow... Help for you belt eating Gen4. The amount of heat buildup in the...

    CAD$114.99
  •  This 4 pc. kit consists of two shock tower vents are two rear panel vents, giving you the need air flow to keep you running cool. Vents are made using our proven cnc cut flexible plastic frames with a durable pvc coated mesh solvent welded to the frames. Both clutch side vents have a second prefilter layer to keep out even the finest powder snow and...  This 4 pc. kit consists of two shock tower vents are two rear...

    CAD$119.99
  • The proclimb/procross chassis airintake tends to suffer water ingestion problems caused by condensation in the large intake track used on the chassis. The Defender intake is a cnc machined plastic plate that bolts onto the nosecone supplying a defense against moisture, belt dust and ice that is commonly found in the intake of the proclimb chassis. The proclimb/procross chassis airintake tends to suffer water...

    CAD$154.99
Showing 1 - 15 of 15 items